本科生课程：机械制图、机械设计基础

研究生课程：摩擦学

社会/学术兼职：

中国腐蚀与防护学会磨蚀与防护技术专业委员会委员

北京高等学校机械类专业群专家委员会 秘书长

《中国表面工程》期刊编委

中国图学学会理事

北京图学学会副理事长

教育经历：

1991.09-1995.06   湖南科技大学机械设计及理论专业，获学士学位

1999.09-2002.07   河南理工大学机械设计制造及其自动化专业，获硕士学位

2005.03-2008.02   中国矿业大学(北京)机械设计及理论专业，获博士学位

工作经历：

1995.06-1999.09   湖南科技大学机电工程学院，助教/讲师

2002.07-2005.03   湖南科技大学机电工程学院，讲师/副教授

2008.03-至  今   北京科技大学机械工程学院，副教授/教授、博士生导师

2016.09-2017.09   英国华威大学，访问学者

代表性论著：

[1] Ping Chen, Gaoyu Wang, Jianchao Li, Meng Zhang, Xiaoxi Qiao. Preparation of textured epoxy resin coatings for excellent hydrophobicity and corrosion resistance. Progress in Organic Coatings, 2023, 175: 107312.

[2] Kangning Jin, Ping Chen*, Pengni Feng. Modeling for evaluating the effect of powder flow during laser cladding process: From thermal and flow fields to microstructure of the molten pool. Surface & Coatings Technology, 2023, 469: 129799

[3] Meng Zhang, Ping Chen*, Gaoyu Wang, Ting Dai, Peizhe Sun. Preparation of bio-inspired liquid-infused surface on epoxy resin coating for reliable hydrophobic and anti-corrosion properties. Progress in Organic Coatings, 2023, 184: 107851.

[4] Kangning Jin, Ziyou Yang, Ping Chen*, Pengni Feng, Xiaoxi Qiao. Modeling of solidification process during multi-track laser cladding with 3D cellular automata coupling gas-liquid interface tracking and solute suppression nucleation. Journal of Materials Processing Technology, 2023, 315: 117927.

[5] Meng Zhang, Ping Chen*, Gaoyu Wang, Ting Dai, Peizhe Sun. Preparation of liquid-infused surface on epoxy resin for improved tribological and anti-corrosion performance. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2023, 668: 131472.

[6] Mingji Huang, Ping Chen, Xiaoxi Qiao. Fretting wear characteristics of SLM-formed 316L stainless steel in seawater. Lubricants, 2023, 11, 7.

[7] Li Junling, Chu Weicheng, Feng Pengni, Wang Baoyu, Chen Ping. Fang Shuang. Numerical and experimental research on shafts with elliptical sections formed by cross wedge rolling. The International Journal of Advanced Manufacturing Technology, 2023, 127(5-6): 2969-2978.

[8] Mingji Huang, Yili Fu, Xiaoxi Qiao, Ping Chen. Investigation into friction and wear characteristics of 316L stainless-steel wire at high temperature. Materials, 2023, 16, 213.

[9] Li Junling, Li Zheng, Wang Baoyu, Sun Chaoyang, Chen Ping. Fang Shuang. Investigation on the formation of central damage in cross wedge rolling of GH4169 alloy. Archives of Civil and Mechanical Engineering, 2023, 23(3): 204.

[10] Meng Zhang, Ping Chen*, Jianchao Li, Gaoyu Wang. Water-repellent and corrosion resistance properties of epoxy-resin-based slippery liquid-infused porous surface. Progress in Organic Coatings, 2022, 172: 107152.

[11] Kangning Jin, Ziyou Yang, Ping Chen*, Guoshun Huang, Xiaoxi Qiao. Dynamic solidification process during laser cladding of IN718: multi-physics model, solute suppressed nucleation and microstructure evolution. International Journal of Heat and Mass Transfer, 2022, 192: 122907.

[12] Bochao Cui, Ping Chen*, Yuanqi Zhao. Numerical simulation of particle erosion in the vertical-upward-horizontal elbow under multiphase bubble flow. Powder Technology, 2022, 404: 117437.

[13] Ping Chen, Bochao Cui, Jianchao Li, Jiaqi, Zheng, Yuanqi Zhao. Particle erosion under multiphase bubble flow in horizontal-vertical-upward elbows. Powder Technology, 2022, 397: 117002.

[14] Zhen Sun, Weixu Yang, Ping Chen, Yuyan Zhang, Xiaoli Wang, Yanqiang Hu. Effects of PDMS base agent ratios and texture sizes on the electrical performance of triboelectric nanogenerators. Advanced Materials Interfaces, 2022, 9: 2102139.

[15] Weixu Yang, Xiaoli Wang, Ping Chen, Xiaoxi Qiao. Viscoelastic adhesive contact between a sphere and a two-dimensional nano-wavy surface. Applied Surface Science, 2022, 586: 152828.

[16] Jie Zhang, Wenyue Li, Ruiqiang Qin, Ping Chen, Yanmin Liu, Xiongjun Liu, Lei Gao. An atomic insight into the stoichiometry effect on the tribological behaviors of CrCoNi medium-entropy alloy. Apply Surface Science, 2022, 593: 153391.

[17] Wenwen Liu, Xiaoxi Qiao, Shida Liu, Ping Chen. A review of nanomaterials with different dimensions as lubricant additives. Nanomaterials, 2022, 12, 3780.

[18] Jianchao Li, Ping Chen*, Yuan Wang, Gaoyu Wang. Corrosion resistance of surface texturing epoxy resin coatings reinforced with fly ash cenospheres and multiwalled carbon nanotubes. Progress in Organic coatings, 2021, 158: 106388.

[19] Ping Chen*, Yuan Wang, Jianchao Li, Weicheng Chu. Synergetic effect of fly ash cenospheres and multi-walled carbon nanotubes on mechanical and tribological properties of epoxy resin coatings. Journal of Applied Polymer, 2021, 138: e50789.

[20] Jianchao Li, Ping Chen*, Yuan Wang. Tribological and corrosion performance of epoxy resin composite coatings reinforced with graphene oxide and fly ash cenospheres. Journal of Applied Polymer, 2021, 138: e50042.

[21] Weixu Yang, Xiaoli Wang, Ping Chen, Yanqiang Hu, Lizhou Li, Zhen Sun. On the controlled adhesive contact and electrical performance of vertical contact-separation mode triboelectric nanogenerators with micro-grooved surfaces. Nano Energy, 2021, 85: 106037.

[22] Xiaoxi Qiao, Tongling Xia, Ping Chen*. Numerical research on effect of overlap ratio on thermal-stress behaviors of the high-speed laser cladding coating. Chinese Physics B, 2020, 30(1): 018104.

[23] Ping Chen*, Xiaojie Liu, Mingji Huang, Zhe Shi, Bin Shan. Numerical simulation and experimental study on tribological properties of stamping die with triangular texture. Tribology International, 2019, 132: 244-252.

[24] Xiaoxi Qiao, Xiangjun Zhang, Ping Chen, Yu Tian, Yonggang Meng. Effects of square micro-pillar array porosity on the liquid motion of near surface layer. Chinese Physics B, 2020, 29(2): 024702.

[25] Mingji Huang, Zongxin Zhang, Ping Chen. Effect of selective laser melting process parameters on microstructure and mechanical properties of 316L stainless steel helical micro-diameter spring. The international Journal of Advanced Manufacturing Technology, 2019, 104: 2117-2131.

[26] Ping Chen*, Yuan Wang, Jianchao Li, Hui Wang, Lei Zhang. Adhesion and erosion properties of epoxy resin composite coatings reinforced with fly ash cenospheres and short glass fibers. Progress in Organic coatings, 2018, 125: 489-499.

[27] Jianchao Li, LiFeng Zheng, Xiaohua Sha, Ping Chen*. Microstructural and mechanical characteristics of graphene oxide‐fly ash cenosphere hybrid reinforced epoxy resin composites. Journal of Applied Polymer, 2018, 47173-47180.

[28] Chen Ping*, Li Junling, Li Yunlong. Effect of geometric micro-groove texture patterns on the tribological performance of stainless steel. Journal of Central South University, 2018, 25: 331-341.

[29] Chen Ping*, Li Jianchao, Zhang Lei. Analysis of mechanical characteristics of fly ash cenospheres reinforced epoxy composites. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2018, 33(1): 139-145.

[30] Junlin Li, Baoyu Wang, He Huang, Shuang Fang, Ping Chen, Jinxia Shen. Unified modelling of the flow behaviour and softening mechanism of a TC6 titanium alloy during hot deformation, 2018, 748: 1031-1043.

[31] Ping Chen*, Yingqian La. Microstructure and tribological behavior of stripe patterned TiN film prepared with filtered cathodic vacuum arc deposition (FCVAD). Advanced Engineering Materials, 2017: 1-7.

[32] Chen Ping*, Li Junling, Shi Zhe, Xiang Xin. Numerical optimization of gourd-shaped surface texture and experiment of tribological performance. Journal of Central South University, 2017, 24: 2773-2782.

[33] Ping Chen*, Xin Xiang, Tianmin Shao, Yingqian La, Junling Li. Effect of triangular texture on the tribological performance of die steel with TiN coatings under lubricated sliding condition. Applied Surface Science, 2016, 389:361-368.

[34] Yanhong Gu, Lingling Chen, Wen Yue, Ping Chen, Fei Chen, Chengyun Ning. Corrosion behavior and mechanism of MAO coated Ti6Al4V with a grain-fined surface layer. Journal of Alloys and Compounds, 2016, 664: 770-776.

[35] Wang Yunfei, Xi Yin, Chen Ping*, Wan Jing. Combination of splicing visualization and assembling visualization during education carried by self-optimizing student presentation. Computer Aided Drafting Design and Manufacturing, 2015, 25(2): 60-64.

[36]黄明吉, 刘圣艳, 乔小溪, 陈平, 刘中海, 张晓昊. 离心泵仿生微结构叶片减阻特性的仿真研究. 表面技术, 2023, 52(02): 196-205.

[37] 刘明源, 陈平*, 马建设. 直驱式四足机器人的结构优化设计与研究. 中国机械工程,  2021, 32(18): 2246-2253.

[38] 黄明吉, 张玮珺, 陈平, 冯少川. 激光加工网状微织构对不锈钢微丝摩擦磨损性能的影响. 表面技术, 2021, 50(1): 322-330.

[39] 乔小溪, 单斌, 陈平*. 固-液两相流黑水管道冲蚀磨损的数值模拟研究. 摩擦学学报, 2020, 40(6): 726-734.

[40] 杨潍旭, 王晓力, 陈平. 摩擦纳米发电机表面织构的优化设计. 机械工程学报, 2020, 56(3): 130-136.

[41] 乔小溪, 张向军, 陈平, 田煜, 孟永刚. 微矩形凹槽表面液滴各向异性浸润行为的研究. 物理学报, 2020, 69(3): 034702.

[42] 单斌, 陈平*, 乔小溪, 赵元琪. 基于实验和CFD模拟的煤气化黑水处理系统管道失效分析. 表面技术, 2019, 48(12): 247-256.

[43] 刘晓杰, 金康宁, 单斌, 陈平*. 织构化冲压模具的应力数值模拟分析. 表面技术, 2019, 48(8): 9-15.

[44] 陈平*, 史哲，剌颖乾，项欣. 基于凹模压边区摩擦学性能的冲压仿真分析. 中国表面工程, 2018, 31(1): 59-66.

[45] 陈平*, 马勇, 万建成, 江明, 汤广瑞, 周亚傲. 考虑股线接触与摩擦行为的710mm2碳纤维复合芯导线(ACCC) 股线损伤分析. 摩擦学学报, 2017, 37(5): 565-573.

[46] 李苗苗, 陈平*, 李建超. 粉煤灰微珠含量与粒径级配比对环氧树脂基复合材料弯曲性能的影响. 复合材料学报, 2017, 34(2): 345-351.

[47] 陈平*, 李俊玲, 邵天敏, 项欣, 刘光磊. 考虑表面张力影响的表面织构最优参数分析. 机械工程学报, 2016, 52(19): 123-131.

[48] 陈平*, 项欣, 李俊玲, 邵天敏, 刘光磊. 沟槽型织构摩擦学性能的数值模拟与实验研究. 材料工程, 2016, 44(6): 31-37.

[49] 陈平*, 周昭丞. 科技创新团队模式与本科生创新创业—基于北京科技大学竞技机器人队的调查. 高等理科教育, 2020, 152(4): 46-52.

[50] 陈平*, 刘朔頔, 许倩. 以学生为主导的工程制图双语教学模式设计与实践. 图学学报, 2017, 38(2): 283-288.

[51] 陈平 参编. 数字化成形与先进制造技术. 机械工业出版社, 2020.

[52] 黄明吉, 陈平 主编. Arduino基础与应用. 北京航空航天大学出版社, 2019.

[53] 陈平 参编. 摩擦学材料及表面工程. 国防工业出版社, 2012.

主要科研业绩：

[1] 基于多填料和表面织构协同增强方法的环氧树脂复合涂层制备及耐磨抗蚀机理，国家自然科学基金项目(51975042)，主持

[2] 梯度织构化舰船装备水润滑轴承性能强化研究，装备预研项目，主持

[3] 舰船用织构化环氧树脂自愈合涂层设计及防腐耐磨性能研究，国防基础科研计划项目，主持

[4] 冲压模具表面织构化的主动设计制造及其摩擦和成形机理研究，北京科技大学顺德研究生院科技创新专项资金项目(BK19AE007)，主持

[5] 新型环氧树脂复合涂层摩擦学行为研究，中央高校基本业务经费项目(FRF-GF-17-B20)，主持

[6] 电机铁芯的高速冲模具设计，中央高校基本业务经费项目(FRF-BR-15-037A)，主持

[7] 高铝粉煤灰空心微珠填充环氧树脂复合材料及其冲蚀磨损行为研究，国家自然科学基金项目(51305023)，主持

[8] LED发光模块生产线关键工序智能化技术研究，佛山市人民政府科技创新专项资金项目(BK21BE018)，参与

[9] 零件柔性装配技术研究，北京科技大学顺德研究生院科技创新专项资金项目(BK20BE018)，参与

[10] 大型轴类楔横轧关键共性技术，国家重点研发计划课题(2018YFB1307901)，参与

[11] 面向激光装备智能制造过程的虚实融合技术研究与应用，广东省重点领域研发计划(2019B010150001)，参与

[12] 轻量化矿用应急潜水泵研制，国家重点研发计划课题(2018YFC0810505)，参与

[13] 含微细粉体颗粒流能质传递激励及强化方法，国家重点研发计划课题(2017YFB060350102)，参与

[14] 三维蜂巢蓄换体烟气余热回收净化一体化技术，国家重点研发计划课题(2016YFB0601102)，参与

[15] 输电线路索道支架车优化设计研究，校企合作项目，主持

[16] 大截面导线配套电力施工机具的优化设计研究，校企合作项目，主持

[17] 输电线路岩石锚杆钻机优化设计研究，校企合作项目，主持

[18] 落地抱杆的参数化建模及仿真自动化生成系统，校企合作项目，主持

[19] 硅酸钙粉粉体表面处理设备研制，校企合作项目，主持

[20] 高铝粉煤灰微珠高值化应用研究，校企合作项目，主持

[21] 液压冲击锤框架成套设备及水下成像技术研发，校企合作项目，参与

[22] 工业喷码机上位机软件开发，校企合作项目，参与

[23] P3车载实验室关键模块设计，校企合作项目，参与

成果与荣誉：

[1] 机械工程制图基础及习题集(第2版)，北京高等教育精品教材，2013

[2] 北京科技大学首届“微课教学比赛”三等奖，2014

[3] 第二十七届北京科技大学教育教学成果一等奖，2016

[4] 工程制图(双语)，北京科技大学研究型教学示范课，2018

[5] 入选“北京科技大学青年教学骨干人才培养计划”，2018

[6] 第二十九届北京科技大学教育教学成果二等奖，2020

[7] 机械制图AII课程，北京科技大学本科生优质课程，2022

[8] 机械制图AII课程，国家级一流本科课程，2023

[9] 北京科技大学优秀本科生导师，2016

[10] 北京科技大学第十四届 ~ 第十八届“我爱我师-我心目中最优秀的老师”，2013~2017(连续5届)

[11] 北京科技大学“我爱我师”金质奖章，2017

[12] 北京科技大学师德先锋，2018

[13] 第五届北京科技大学教学名师奖，2019

[14] 北京市优秀本科毕业设计指导教师，2019

[15] 第二届北京市大学生节能节水低碳减排社会实践与科技竞赛特等奖优秀指导教师，2020

[16] 《中国表面工程》期刊优秀审稿专家，2021、2022

[17] 第十六届“高教杯”全国大学生先进成图技术与产品信息建模创新大赛·数字化创新设计赛道二等奖，指导教师，2023

[18] 第十六届“高教杯”全国大学生先进成图技术与产品信息建模创新大赛·增材制造赛道二等奖，指导教师，2023