学 位：博士

所在系所：零件轧制研究中心

行政职务：无

办公地点：零件轧制研究中心南202

办公电话：010-62332331

电子邮箱：jingzhou@ustb.edu.cn

科研方向：高性能轧制成形、金属轻量化成形制造、金属材料多尺度力学行为、塑性成形中跨尺度多场耦合仿真模拟

 

社会/学术兼职：

中国机械工程学会塑性工程分会会员

《塑性工程学报》青年编委

担任Int. J. Mech. Sci., J. Manuf. Process., Metall. Mater. Trans. A, J. Mater. Res. Technol., Int. J. Adv. Manuf. Technol.等SCI期刊审稿专家

教育经历：

2006.09—2010.06  北京科技大学，机械工程及自动化专业，获学士学位

2010.09—2015.06  北京科技大学，机械工程专业，获博士学位

工作经历：

2015.07—2017.12  北京科技大学，机械工程学院，师资博士后

2015.07—2024.06  北京科技大学，机械工程学院，助理研究员

2023.11—2024.05  香港大学，机械工程系，访问学者

2024.06—至今  北京科技大学，机械工程学院，副研究员

 

代表性论著：

[1] Ma Long, Zhou Jing, Zhou Qiang, Li Hui, Wang Baoyu*. A new rotary bending-cropping process for high-strength steel bars via cross rolling[J]. CIRP Journal of Manufacturing Science and Technology, 2026, 69: 17-31.

[2] Liu Wei, Wang Baoyu*, Zhou Jing. Investigation on deformation characteristics of warm helical rolling process of steel balls and influence of rolling parameters on forming process[J]. Materials Today Communications, 2025, 49.

[3] Zhou Jing*, Yang Xiaoming, Wang Baoyu, Wang Jiapeng. M-K model based forming limit prediction of aluminum-lithium alloy 2060 and its application in hot stamping[J]. The International Journal of Advanced Manufacturing Technology, 2023, 127(11-12): 5293-5306.

[4] Zhou Jing*, Liu Shengqiang, Wang Baoyu, Xu Hao. Numerical prediction of microstructure evolution of small-diameter stainless steel balls during cold skew rolling[J]. Materials, 2023, 16(8).

[5] Zhou Jing*, Cao Xiaoqing, Shen Jinxia, Wang Baoyu. A unified constitutive relationship with the internal state variables of grain evolution behavior and the application in numerical simulation of cross wedge rolling[J]. Journal of Materials Research and Technology, 2022, 21: 1365-1380.

[6] Zhou Jing*, Yang Xiaoming, Wang Baoyu, Mu Yanhong. Investigation of interfacial heat transfer characterization for TC4 alloy in triple-layer sheet hot stamping process[J]. The International Journal of Advanced Manufacturing Technology, 2022, 121(9-10): 5779-5792.

[7] Zhou Jing*, Miao Jihang, Wang Baoyu, Wang Jiapeng. Effect of solution treatment and aging treatment on mechanical properties of 2060 Al-Li alloy and process multi-objective optimization[J]. Metals, 2022, 12(6).

[8] Zhou Jing*, Yang Xiaoming, Wang Baoyu, Xiao Wenchao. Springback prediction of 7075 aluminum alloy V-shaped parts in cold and hot stamping[J]. International Journal of Advanced Manufacturing Technology, 2021, 119(1-2): 203-216.

[9] Zhou Jing*, Yang Xiaoming, Mu Yanhong, Liu Shengqiang, Wang Baoyu. Numerical simulation and experimental investigation of tailored hot stamping of boron steel by partial heating[J]. Journal of Materials Research and Technology, 2021, 14: 1347-1365.

[10] Zhou Jing*, Shen Jinxia, Wang Baoyu, Huang Xu, Guo Wei. Numerical and experimental study on the inner diameter uniformity of hollow shafts in cross-wedge rolling with mandrel[J]. Archives of Civil and Mechanical Engineering, 2021, 21(3).

[11] Mu Yanhong, Zhou Jing, Wang Baoyu*, Wang Qiaoling, Ghiotti A, Bruschi S. Numerical simulation of hot stamping by partition heating based on advanced constitutive modelling of 22MnB5 behaviour[J]. Finite Elements in Analysis and Design, 2018, 147: 34-44.

[12] Mu Yanhong, Wang Baoyu*, Zhou Jing, Huang Xu, Li Junling. Influences of hot stamping parameters on mechanical properties and microstructure of 30MnB5 and 22MnB5 quenched in flat die[J]. Journal of Central South University, 2018, 25(4): 736-746.

[13] Zhou Jing, Mu Yanhong, Wang Baoyu*. A damage-coupled unified viscoplastic constitutive model for prediction of forming limits of 22MnB5 at high temperatures[J]. International Journal of Mechanical Sciences, 2017, 133: 457-468.

[14] Mu Yanhong, Wang Baoyu, Zhou Jing*, Huang Xu, Li Xuetao. Hot Stamping of Boron Steel Using Partition Heating for Tailored Properties: Experimental Trials and Numerical Analysis[J]. Metallurgical and Materials Transactions A, 2017, 48A(11): 5467-5479.

[15] Mu Yanhong, Wang Baoyu, Zhou Jing*, Kang Yi, Li Xuetao. Heating Parameters Optimization of Hot Stamping by Partition Heating for Tailored Properties[J]. ISIJ International, 2017, 57(8): 1442-1450.

[16] Zhou Jing, Wang Baoyu*, Lin J, Fu Lei, Ma Wenyu. Forming defects in aluminum alloy hot stamping of side-door impact beam[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(11): 3611-3620.

[17] Zhou Jing, Wang Baoyu*, Huang Mingdong. Two constitutive descriptions of boron steel 22MnB5 at high temperature[J]. Materials & Design, 2014, 63: 738-748.

[18] Zhou Jing, Wang Baoyu*, Huang Mingdong, Cui Dong. Effect of hot stamping parameters on the mechanical properties and microstructure of cold-rolled 22MnB5 steel strips[J]. International Journal of Minerals, Metallurgy, and Materials, 2014, 21(6): 544-555.

[19] Zhou Jing, Wang Baoyu*, Lin J, Fu Lei. Optimization of an aluminum alloy anti-collision side beam hot stamping process using a multi-objective genetic algorithm[J]. Archives of Civil and Mechanical Engineering, 2013, 13(3): 401-411.

[20] 周靖,王宝雨*,徐伟力,黄鸣东,易生虎,校文超. 耦合损伤的22MnB5热变形本构模型[J]. 北京科技大学学报, 2013, 35(11):1450-1457.

 

授权发明专利：

[1] 大型轴类零件外轮廓非接触精确测量装置及方法, 2021-09-28, 中国, CN202111144570.4

[2] 一种楔横轧成形轴向轧制力与轧件转速测量装置, 2021-08-30, 中国, CN202111005009.8

[3] 一种双转轴式电动伺服柔性斜轧机的多功能控制系统, 2021-06-15, 中国, CN202010124616.5

[4] 一种双转轴悬臂式斜轧机, 2020-06-26, 中国, CN201910538322.4

[5] 一种辊式楔横轧机整体更换模具装置, 2021-10-22, 中国, CN202011511105.5

[6] 一种具有余热回收利用功能的钢球控制冷却装置, 2021-04-20, 中国, CN201911310589.4

 

成果与荣誉：

主持国家自然科学基金（青年项目、联合基金项目合作单位负责人）、中央高校基本科研业务费、金属轻量化成形制造北京市重点实验室开放课题等项目。作为项目骨干参与国家重点研发计划、国家自然科学基金联合基金项目、国家自然科学基金面上项目、北京市自然科学基金、北京市科技计划项目等。主持或参与企业技术开发、许可、服务项目20多项。发表SCI/EI检索学术论文40余篇。